Brands: Shure

Shure MoveMic Two Receiver Kit 2-Person Clip-On Wireless Microphone System for Mobile Devices and Cameras

Small Mics, Big Sound

MoveMic has been purposely designed with one of the smallest, most discreet form factors on the market to be almost invisible—nobody wants a big, bulky microphone distracting your next shot.
The clip-on lav mics feature omnidirectional pickup patterns that make them easy to place on talent for broadcast-quality speech and vocals. Snap on the included windscreens to reduce breath noise and vocal pops.
Ensure the lavalier microphones are worn with the clip facing outwards for the most discreet placement to make you or your subject the most important element in every shot.
The mics are rated IPX4 for water-resistance, so they’re ready for rain, spills, and splashes.

Reliable Shure Audio

Don’t worry about your kit, let your kit worry about you. Shure’s decades of experience in producing wireless audio have been packed into the MoveMic family of microphones for reliability and durability.
Use the free ShurePlus MOTIV Video or Audio apps to configure audio settings such as gain, limiter, compression, noise reduction, and EQ and record/livestream your content directly from the app.
Unlike traditional Bluetooth that prioritizes playback, Shure’s proprietary Bluetooth technology prioritizes audio input, ensuring reliable, broadcast-quality sound from both clip-on lavaliers at the same time.
The clip-on lavs can operate at normal RF power or at high RF power when you need more distance or have to overcome interference. (High RF power isn’t available in all regions and is only applicable in the Americas. Normal RF power is available globally—including the Americas.)

Easy Pairing and Extended Battery Life

Get ready to record in seconds by pairing your MoveMic lavalier microphones to your phone via the Shure MOTIV Video app or to your MoveMic Receiver.
After first pairing, the microphones will automatically reconnect to the last device when removed from the charging case and powered on.
When recording directly to the phone, each MoveMic lavalier microphone will operate for up to 11 hours on normal RF power and over 8 hours on high RF power.
When paired with the receiver, each lav will operate for 8 hours on normal power and up to 7 hours on high-RF power.
Plus an additional two eight-hour charges from the charge case gives you up to 24 hours of recording for every full charge.

Use with or without Receiver

Not only does the MoveMic offer up to two channels of high-quality audio recording; it has the power to connect directly to your phone via Bluetooth without the need for a receiver. Simply download our Shure MOTIV Video or Audio app, connect your MoveMics within the app and you’re set.
Direct to phone is recommended for use with the MOTIV Video and Audio Apps only. Use the dual-channel MoveMic Receiver for additional compatibility with third-party apps on mobile devices as well as DSLR/mirrorless cameras and computers using the supplied USB-C or 3.5mm cables.
Pick up a USB-C to Lightning cable (available separately) should you wish to connect to a Lightning-enabled iOS device.
The versatile system automatically switches from Bluetooth to a 2.4 GHz wireless transmission when paired with the MoveMic Receiver.
The receiver features an easy to navigate menu system with a crisp LCD screen and will run for up to 8 hours on a single charge at normal RF power and 8 hours at high RF power; it can also be powered via USB.

Maximum number of simultaneous systems	2
Frequency response	50-20Khz +/1Db
Dynamic range (A weighting)	100dB
Equivalent input noise (A-weighted, Camera Output = Line level)	31dB SPL
Equivalent input noise (A-weighted, Direct to phone)	36dB SPL
Maximum sound pressure level. (SPL)	130dB SPL
Sensitivity when used with MV-LAV (Mic Gain = 0dB)	-45dBV @94dBSPL
Resolution	24 Bit
Sampling rate	48ksps or 44.1ksps (depending on host device)
Gain adjustment range	0 – 60 dB
Latency on 3.5mm output (without NR)	15.33 ms (delay 1 frame per second)
Latency on 3.5mm output (with NR)	17.33 ms
Latency on USB output	dependent on host device

Description